One of the revisions of the fat PlayStation 2 was the V4. They were found in many of the earliest SCPH-3000x systems, as well as the SCPH-3500x systems. Matching console model numbers and board numbers are listed below.

Modbo 4.0 The Modbo 4.0 is a more basic chip in terms of functionality, and should support all PS2 systems from V1 through V18. Modbo 5.0 The Modbo 5.0 is a more advanced chip in terms of functionality, and should support all PS2 systems from V1 through V18. Added functionality includes support for booting from USB devices (DEV3 boot mode). .This subreddit is dedicated to the best selling video game console in history, Sony's Playstation 2. We are all about the games, discussions.

You can find the model number on the sticker on the bottom of the console, and the board number is printed on the PS2 main board if you take apart your console. Note that there can be multiple board numbers within a specific model number.

• NTSC-J (Japan):
  • SCPH-30000 (GH-010)
  • SCPH-35000 (GH-010)
• NTSC-U/C (United States)
  • SCPH-30001 (GH-010)
  • SCPH-35001 (GH-010)
• PAL
  • SCPH-30002 (GH-010)
  • SCPH-30003 (GH-010)
  • SCPH-30004 (GH-010)
  • SCPH-35002 (GH-010)
  • SCPH-35003 (GH-010)
  • SCPH-35004 (GH-010)
  • SCPH-35005 (GH-010)

Note that there are multiple versions of the Modbo modchips available, but the installation diagrams are all the same. Some example versions are Modbo 3.0, Modbo 4.0, Modbo 5.0, and Modbo 750.

For more information about Modbo modchips click here, for more information about PS2 modchips in general click here.

Some V4 consoles have a gap in the middle of the pins of the BIOS chip (near pins Q, T, U, V, R, O, P, N, and M). For those systems use this diagram:

Some V4 consoles don’t have a gap in the middle of the pins of the BIOS chip (near pins Q, T, U, V, R, P, O, N, and M). For those systems use this diagram:

Here are some tips I have for you when you are soldering your chip into a V4.

• Using 30 AWG solid core wire works well for most of the points.
• Use some thicker wire for the 5V and ground wires.

Here’s a list of people who have successfully modded their console with this diagram. Leave a comment and I’ll add you to the list.

1. William Quade (me)
2. LAC

This section has photos of some successful installations which you can use to get a better understanding of how everything is wired and positioned. Leave a comment and I’ll add your installation to the list

1. William Quade (me)

IN STOCK The Modbo v4.0 is the latest chip from the guys at Modbo.com. The Modbo v4.0 is compatible with v5 to v16 and it is also compatible with the newly released SCPH-7700x & 7900x consoles. Its PCB layout is a perfect “L” shape which makes install a breeze. We believe this chip is a great solution for those looking. Apr 18, 2014 - I am an experienced solderer (love my trusty 15 watt radioshack firestarter, with 'SMT' tips lol). So I have an old v7 ps2 lying around that I've been using the slide card with for like ever now (I'm a college student so I have very little time for soldering projects), but over this summer I'd like to install this matrix. Aplikasi stok barang dengan excel.

I want to play import PS1 and PS2 games. I've looked into soft modding, but it doesn't give me the functionality I desire (ability to play PS1 and PS2 games from any region using the original disks, that's all I want), so it looks like I need to install a mod chip. I thought I'd run my thoughts past you guys! I'm thinking the Modbo 4.0, this seems to be a popular one, and from what I've read, it has the region-related features I want. Would this be a good choice? As to installing it, my PS2 is a PAL (Australian) SCPH-50002, from what I've read, it has a V9 motherboard, so is this the diagram I should be following? It says 'USA' on the diagram, so is installation different for my PAL console?

Also, I see there's some alternative solder locations for the wires that are normally soldered to the legs. Jigsaw movie torrent. This sounds appealing to me, since soldering to the legs sounds really fiddly, and there seems like there would be a strong likelihood of accidental bridging, but is there a downside to soldering to the alternative locations?

There were a few things I was wondering: 1) Apparently modchips can burn out the laser, is there anything I can do to prevent this (something about a 'diode fix'?)? 2) Will NTSC games automatically run at 60Hz and PAL at 50Hz? 3) When the mod chip loads up an import PS1 game, it's using the console's PS1 hardware, just like a stock PS2 right?

It's not emulating the game? 4) Does a modded console function essentially the same as a stock console? I can just pop the game in and it loads up, nothing more required? 5) Some guides mentioned scratching lacquer off the points you're soldering to. Would this only be necessary if you can't get the solder to stick to where it should, or is this the case with all PS2s?

6) How badly can one screw this up? It doesn't seem massively complicated to me, but in case I accidentally create a short or solder to the wrong point or something, does my console die the moment I switch it on, so is it possible to go back and correct the problem without issue? 2) Will NTSC games automatically run at 60Hz and PAL at 50Hz? A new pair of glasses chuck c for mac. Color format switches along with Hz also, unlike other consoles.

Modbo App

Standard PS2s support the same in-game video modes and cables worldwide. It does not associate them with either console or game region. Instead all instances of a specific disk, default into the same mode on all PS2s.

Modbo Tv

Barring mods/patches/etc to force otherwise.Yes one CAN do wasteful things like import and chip an american ps2 then use rgb scart with only PAL 576i 50hz games! Correct me if any of this is wrong.

..